|
|
Straight Stitch Slide Plate
Simply slide the front lever to switch to a single needle hole! Sew the lightest fabrics with perfect needle permeation. The single needle plate will not allow fabrics to be pushed into the needle hole. Free motion stitch with precision and perfection. Sew with confidence, when the single needle hole plate is set, only the straight stitch patterns can be selected. |
Needle hole for straight stitches |
Normal needle hole |
|
|
|
|
|
|
Customize Your Machine with even more New Functions!
|
|
Easy-to-use Quick Select Buttons
* Start/stop
* Reverse stitch
* Lock stitch
* Thread trimming
* Needle up/down
* Presser foot auto lift |
|
|
Foot Switch Function
Allowing for greater versatility, Juki now offers assigned foot control options. With the ability to assign function to the heel side of the foot controller you can now lift the presser foot, trim threads, reverse stitch or single stitch by pressing on the heel side of the foot controller. Also allowing for no special settings you have complete control to customize your machine to best fit you. |
|
|
Presser Foot Pivot Function
When you stop sewing, the needle stops in the down position and presser foot automatically lifts to allow for fabric movement. Sew corners or pivot with ease, when you resume sewing the presser foot automatically lowers for continuous smooth sewing.
*This function can also be switched off. |
|
|
Setting of the Presser Foot Lifting After Thread Trimming
Because the presser foot is automatically lifted after automatic thread trimming, you can quickly remove fabrics.
*This function can also be switched off. |
|
|
Adjustable Starting / Reverse Stitch Speed
You can adjust the starting and reverse stitch speed between three steps of fast, normal, and slow. |
|
|
|
|
|
|
Lock Stitch
For the lock stitch at the start and the end of sewing, you can choose two kinds of “Reverse stitch” and “Lock stitch”. If you press the lock stitch button in the middle of sewing a pattern, the machine stops after sewing one cycle of the pattern. |
|
|
Low-Speed Inching Sewing
By pressing and holding the needle up/down button, you can sew slowly. Sew corners, stops and starts with precision. |
|
Speedy Straight Sewing
With a maximum straight sewing speed of 1,050 stitches/min, you can sew fast. |
|
Knee-Lifting Lever
Presser foot can be raised and lowered by the knee-lifting lever. Presser foot lift is up to 0.5″(12mm) when the lever is used. When the foot is raised to the maximum height, you can also switch it back from automatic operation (button) to manual operation (lever). |
|
|
|
|
|
Automatic Needle Threader
Simply place the thread in the guide and lower the lever. Easily and quickly thread a needle with one hand. |
|
|
Bobbin Winder with Independent Motor
To set up the bobbin for winding, simply wind some thread around the bobbin and pass it through the guide. You can wind the bobbin thread everytime, and also use a cutter after winding. |
|
|
Quick Bobbin Preparation
The bobbin preparation is easy. Just follow the guide and it is not necessary to pull up the bobbin thread. |
|
|
|
|
|
Elongation Pattern
Change the overall length without changing the sewing density of the pattern. |
|
|
Free Motion
Flip the switch and drop your feed dogs. Enjoy both straight stitch and specialized zig zag for free motion. Adjust the presser foot height for easy movement. Enjoy the Freedom of Free Motion. |
|
|
Direct Stitch Pattern Selection
Often-used sewing patterns such as straight lines, overcast stitches, and zigzag patterns can be quickly selected via direct buttons. You can also adjust the sensitivity of the touch panel. |
|
Large Sewing Space
Enjoy extra space and comfort by adding the accessory table while sewing or quilting. |
|
|
One-Point Patterns
The decorative patterns can be sewn as one point patterns. It is also lovely to create an original tag by combining these patterns with the character stitches. |
|
|
Character Stitch
The machine includes three alphabetic/numeric fonts. Up to ten often-used patterns such as names and initials can be saved in the memory. |
|
|
Corner Sewing of Applique
The stitch width of the needle can be set to automatically and gradually change to achieve a stitch that gives a beautiful finish even to the corner of an applique or the start /end of a line of sewing. By adjusting the width and length, you can also control the angles of your design. |
|
|
Lace Like Patterns
Sewing several patterns in parallel creates lovely lace-like stitches. You can enjoy the combination of patterns that give the image of dedicated lace braid. |
|
|
|
Stitch patterns
|
|
|
|
|
Name
|
HZL-DX5
|
Control system |
Computer |
Number of stitch patterns |
185 |
Number of available fonts |
3 |
Buttonhole |
Automatic (sensor system) with clamping plate |
Direct stitch pattern selection |
10 patterns |
Start/stop button |
Green: Ready to start and/or while sewing
Red: Not ready to start
Orange: When the lock stitch button is pressed while the
sewing machine is engaged in pattern sewing |
Maximum stitch speed |
1,050 sti/min |
Auto thread trimming |
X |
Automatic needle threader |
Automatic needle threader |
Thread tension system |
Automatic |
Automatic lock stitch |
Automatic lock stitch and thread trimming |
Feed mechanism |
BOX feed mechanism |
Presser foot pressure adjustment |
Stepless adjustment |
Drop feed |
X |
Quick bobbin preparation |
X |
Bobbin thread winder |
Bobbin winder with independent motor |
Light |
1 LED light |
Straight stitch slide plate |
X |
Float function |
X |
Free arm |
X |
Change in the length/width of stitches |
Button system |
Number of needle position (straight
stitch/other than straight stitch) |
37 / 3 |
Pattern (right and left) reverse |
X |
Twin needle sewing |
X |
Adjustable starting / reverse stitch speed |
X |
Lock stitch |
X |
Low-speed inching sewing |
X |
Presser foot pivot function |
X |
Memory function |
10 patterns |
Presser foot horizontality holder
button |
X |
Height of lifting of presser foot
(1 step/2 steps) |
Button system: 6 mm
Lever system: 6 mm / 12 mm |
Hard case |
Hard case with accessory storage part |
Knee lifting lever |
X |
Wide table |
Option |
Foot controller |
Included; with foot switch function |
Accessories |
Standard presser foot (A)/Zipper presser foot (B)/Overcasting presser foot (C)/Blind stitch presser foot (D)/Buttonhole presser foot (E)/Manual buttonhole presser foot (I)/Walking foot (N)/Patchwork presser foot (P)/Quilt presser foot (Q)/Bobbin (4)/Needle set HA X 1 #11(1):#14(1):#16(1):for knit #11(1)/Twin needle/Quilt guide/Auxiliary spool pin/T-shape screwdriver/Ripper/Cleaning brush/Spool cap (large)/Spool cap (Middle)/Spool cap (Small)/Foot controller/Knee-lifting lever/Power cord/Hard case/Instruction manual/Operation support DVD |
Dimensions |
445(W)x291(H)x210(D)mm |
Dimensions with hard case |
510(W)x305(H)x257(D)mm |
Arm size |
8.0″x4.4″ (203x112mm) |
Weight |
10.3kg(21.6lbs) |
|